Invariants: Comparing behavior with data frames

This vignette defines invariants for subsetting and subset-assignment for tibbles, and illustrates where their behaviour differs from data frames. The goal is to define a small set of invariants that consistently define how behaviors interact. Some behaviors are defined using functions of the vctrs package, e.g. vec_slice(), vec_recycle() and vec_as_index(). Refer to their documentation for more details about the invariants that they follow.

The subsetting and subassignment operators for data frames and tibbles are particularly tricky, because they support both row and column indexes, both of which are optionally missing. We resolve this by first defining column access with [[ and $, then column-wise subsetting with [, then row-wise subsetting, then the composition of both.

Conventions

In this article, all behaviors are demonstrated using one example data frame and its tibble equivalent:

library(tibble)
library(vctrs)
new_df <- function() {
  df <- data.frame(n = c(1L, NA, 3L, NA))
  df$c <- letters[5:8]
  df$li <- list(9, 10:11, 12:14, "text")
  df
}
new_tbl <- function() {
  as_tibble(new_df())
}

Results of the same code for data frames and tibbles are presented side by side:

new_df() #> n c li #> 1 1 e 9 #> 2 NA f 10, 11 #> 3 3 g 12, 13, 14 #> 4 NA h text

new_tbl() #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 NA f <int [2]> #> 3 3 g <int [3]> #> 4 NA h <chr [1]>

If the results are identical (after converting to a data frame if necessary), only the tibble result is shown.

Subsetting operations are read-only. The same objects are reused in all examples:

df <- new_df()
tbl <- new_tbl()

Where needed, we also show examples with hierarchical columns containing a data frame or a matrix:

new_tbl2 <- function() {
  tibble(
    tb = tbl,
    m = diag(4)
  )
}
new_df2 <- function() {
  df2 <- new_tbl2()
  class(df2) <- "data.frame"
  class(df2$tb) <- "data.frame"
  df2
}
df2 <- new_df2()
tbl2 <- new_tbl2()

new_tbl() #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 NA f <int [2]> #> 3 3 g <int [3]> #> 4 NA h <chr [1]>

For subset assignment (subassignment, for short), we need a fresh copy of the data for each test. The with_*() functions (omitted here for brevity) allow for a more concise notation. These functions take an assignment expression, execute it on a fresh copy of the data, and return the data for printing. The first example prints what’s really executed, further examples omit this output.

with_df(df$n <- rev(df$n), verbose = TRUE) #> { #> df <- new_df() #> df$n <- rev(df$n) #> df #> } #> n c li #> 1 NA e 9 #> 2 3 f 10, 11 #> 3 NA g 12, 13, 14 #> 4 1 h text

with_tbl(tbl$n <- rev(tbl$n), verbose = TRUE) #> { #> tbl <- new_tbl() #> tbl$n <- rev(tbl$n) #> tbl #> } #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 NA e <dbl [1]> #> 2 3 f <int [2]> #> 3 NA g <int [3]> #> 4 1 h <chr [1]>

Column extraction

Definition of x[[j]]

x[[j]] is equal to .subset2(x, j).

	tbl[[1]] #> [1] 1 NA 3 NA
	.subset2(tbl, 1) #> [1] 1 NA 3 NA

NB: x[[j]] always returns an object of size nrow(x) if the column exists.

j must be a single number or a string, as enforced by .subset2(x, j).

df[[1:2]] #> [1] NA	tbl[[1:2]] #> Error: #> ! The `j` argument of #> `[[.tbl_df()` can't be a vector #> of length 2 as of tibble 3.0.0. #> ℹ Recursive subsetting is #> deprecated for tibbles.
df[[c("n", "c")]] #> Error in .subset2(x, i, exact = exact): subscript out of bounds	tbl[[c("n", "c")]] #> Error in `tbl[[c("n", "c")]]`: #> ! Can't extract column with `c("n", "c")`. #> ✖ Subscript `c("n", "c")` must be size 1, not 2.
df[[TRUE]] #> [1] 1 NA 3 NA	tbl[[TRUE]] #> Error in `tbl[[TRUE]]`: #> ! Can't extract column with `TRUE`. #> ✖ `TRUE` must be numeric or character, not `TRUE`.
df[[mean]] #> Error in .subset2(x, i, exact = exact): invalid subscript type 'closure'	tbl[[mean]] #> Error in `tbl[[mean]]`: #> ! Can't extract column with `mean`. #> ✖ `mean` must be numeric or character, not a function.

NA indexes, numeric out-of-bounds (OOB) values, and non-integers throw an error:

df[[NA]] #> NULL	tbl[[NA]] #> Error in `tbl[[NA]]`: #> ! Can't extract column with `NA`. #> ✖ Subscript `NA` must be a location, not an integer `NA`.
df[[NA_character_]] #> NULL	tbl[[NA_character_]] #> Error in `tbl[[NA_character_]]`: #> ! Can't extract column with `NA_character_`. #> ✖ Subscript `NA_character_` must be a location, not a character `NA`.
df[[NA_integer_]] #> NULL	tbl[[NA_integer_]] #> Error in `tbl[[NA_integer_]]`: #> ! Can't extract column with `NA_integer_`. #> ✖ Subscript `NA_integer_` must be a location, not an integer `NA`.
df[[-1]] #> Error in .subset2(x, i, exact = exact): invalid negative subscript in get1index <real>	tbl[[-1]] #> Error in `tbl[[-1]]`: #> ! Can't extract column with `-1`. #> ✖ Subscript `-1` must be a positive location, not -1.
df[[4]] #> Error in .subset2(x, i, exact = exact): subscript out of bounds	tbl[[4]] #> Error in `tbl[[4]]`: #> ! Can't extract columns past the end. #> ℹ Location 4 doesn't exist. #> ℹ There are only 3 columns.
df[[1.5]] #> [1] 1 NA 3 NA	tbl[[1.5]] #> Error in `tbl[[1.5]]`: #> ! Can't extract column with `1.5`. #> ✖ Can't convert from `j` <double> to <integer> due to loss of precision.
df[[Inf]] #> NULL	tbl[[Inf]] #> Error in `tbl[[Inf]]`: #> ! Can't extract column with `Inf`. #> ✖ Can't convert from `j` <double> to <integer> due to loss of precision.

Character OOB access is silent because a common package idiom is to check for the absence of a column with is.null(df[[var]]).

tbl[["x"]] #> NULL

Definition of x$name

x$name and x$"name" are equal to x[["name"]].

	tbl$n #> [1] 1 NA 3 NA
	tbl$"n" #> [1] 1 NA 3 NA
	tbl[["n"]] #> [1] 1 NA 3 NA

Unlike data frames, tibbles do not partially match names. Because df$x is rarely used in packages, it can raise a warning:

df$l #> [[1]] #> [1] 9 #> #> [[2]] #> [1] 10 11 #> #> [[3]] #> [1] 12 13 14 #> #> [[4]] #> [1] "text"	tbl$l #> Warning: Unknown or uninitialised #> column: `l`. #> NULL
df$not_present #> NULL	tbl$not_present #> Warning: Unknown or uninitialised #> column: `not_present`. #> NULL

Column subsetting

Definition of x[j]

j is converted to an integer vector by vec_as_index(j, ncol(x), names = names(x)). Then x[c(j_1, j_2, ..., j_n)] is equivalent to tibble(x[[j_1]], x[[j_2]], ..., x[[j_n]]), keeping the corresponding column names. This implies that j must be a numeric or character vector, or a logical vector with length 1 or ncol(x).¹

tbl[1:2] #> # A tibble: 4 × 2 #> n c #> <int> <chr> #> 1 1 e #> 2 NA f #> 3 3 g #> 4 NA h

When subsetting repeated indexes, the resulting column names are undefined, do not rely on them.

df[c(1, 1)] #> n n.1 #> 1 1 1 #> 2 NA NA #> 3 3 3 #> 4 NA NA

tbl[c(1, 1)] #> # A tibble: 4 × 2 #> n n #> <int> <int> #> 1 1 1 #> 2 NA NA #> 3 3 3 #> 4 NA NA

For tibbles with repeated column names, subsetting by name uses the first matching column.

nrow(df[j]) equals nrow(df).

tbl[integer()] #> # A tibble: 4 × 0

Tibbles support indexing by a logical matrix, but only if all values in the returned vector are compatible.

df[is.na(df)] #> [[1]] #> [1] NA #> #> [[2]] #> [1] NA	tbl[is.na(tbl)] #> [1] NA NA
df[!is.na(df)] #> [[1]] #> [1] 1 #> #> [[2]] #> [1] 3 #> #> [[3]] #> [1] "e" #> #> [[4]] #> [1] "f" #> #> [[5]] #> [1] "g" #> #> [[6]] #> [1] "h" #> #> [[7]] #> [1] 9 #> #> [[8]] #> [1] 10 11 #> #> [[9]] #> [1] 12 13 14 #> #> [[10]] #> [1] "text"	tbl[!is.na(tbl)] #> Error in `vec_c()` at tibble/R/subsetting-matrix.R:12:3: #> ! Can't combine `n` <integer> and `c` <character>.

Definition of x[, j]

x[, j] is equal to x[j]. Tibbles do not perform column extraction if x[j] would yield a single column.

df[, 1] #> [1] 1 NA 3 NA	tbl[, 1] #> # A tibble: 4 × 1 #> n #> <int> #> 1 1 #> 2 NA #> 3 3 #> 4 NA
	tbl[, 1:2] #> # A tibble: 4 × 2 #> n c #> <int> <chr> #> 1 1 e #> 2 NA f #> 3 3 g #> 4 NA h

Definition of x[, j, drop = TRUE]

For backward compatiblity, x[, j, drop = TRUE] performs column extraction, returning x[j][[1]] when ncol(x[j]) is 1.

tbl[, 1, drop = TRUE] #> [1] 1 NA 3 NA

Row subsetting

Definition of x[i, ]

x[i, ] is equal to tibble(vec_slice(x[[1]], i), vec_slice(x[[2]], i), ...).²

tbl[3, ] #> # A tibble: 1 × 3 #> n c li #> <int> <chr> <list> #> 1 3 g <int [3]>

This means that i must be a numeric vector, or a logical vector of length nrow(x) or 1. For compatibility, i can also be a character vector containing positive numbers.

df[mean, ] #> Error in xj[i]: invalid subscript type 'closure'	tbl[mean, ] #> Error in `tbl[mean, ]`: #> ! Can't subset rows with `mean`. #> ✖ `mean` must be logical, numeric, or character, not a function.
df[list(1), ] #> Error in xj[i]: invalid subscript type 'list'	tbl[list(1), ] #> Error in `tbl[list(1), ]`: #> ! Can't subset rows with `list(1)`. #> ✖ `list(1)` must be logical, numeric, or character, not a list.
	tbl["1", ] #> # A tibble: 1 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]>

Exception: OOB values generate warnings instead of errors:

	tbl[10, ] #> # A tibble: 1 × 3 #> n c li #> <int> <chr> <list> #> 1 NA NA <NULL>
	tbl["x", ] #> # A tibble: 1 × 3 #> n c li #> <int> <chr> <list> #> 1 NA NA <NULL>

Unlike data frames, only logical vectors of length 1 are recycled.

df[c(TRUE, FALSE), ] #> n c li #> 1 1 e 9 #> 3 3 g 12, 13, 14

tbl[c(TRUE, FALSE), ] #> Error in `tbl[c(TRUE, FALSE), ]`: #> ! Can't subset rows with `c(TRUE, FALSE)`. #> ✖ Logical subscript `c(TRUE, FALSE)` must be size 1 or 4, not 2.

NB: scalar logicals are recycled, but scalar numerics are not. That makes the x[NA, ] and x[NA_integer_, ] return different results.

	tbl[NA, ] #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 NA NA <NULL> #> 2 NA NA <NULL> #> 3 NA NA <NULL> #> 4 NA NA <NULL>
	tbl[NA_integer_, ] #> # A tibble: 1 × 3 #> n c li #> <int> <chr> <list> #> 1 NA NA <NULL>

Definition of x[i, , drop = TRUE]

drop = TRUE has no effect when not selecting a single row:

df[1, , drop = TRUE] #> $n #> [1] 1 #> #> $c #> [1] "e" #> #> $li #> $li[[1]] #> [1] 9

tbl[1, , drop = TRUE] #> # A tibble: 1 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]>

Row and column subsetting

Definition of x[] and x[,]

x[] and x[,] are equivalent to x.³

Definition of x[i, j]

x[i, j] is equal to x[i, ][j].⁴

Definition of x[[i, j]]

i must be a numeric vector of length 1. x[[i, j]] is equal to x[i, ][[j]], or vctrs::vec_slice(x[[j]], i).⁵

df[[1, 1]]
#> [1] 1
df[[1, 3]]
#> [1] 9

This implies that j must be a numeric or character vector of length 1.

NB: vec_size(x[[i, j]]) always equals 1. Unlike x[i, ], x[[i, ]] is not valid.

Column update

Definition of x[[j]] <- a

If a is a vector then x[[j]] <- a replaces the jth column with value a.

a is recycled to the same size as x so must have size nrow(x) or 1. (The only exception is when a is NULL, as described below.) Recycling also works for list, data frame, and matrix columns.

	with_tbl(tbl[["li"]] <- list(0)) #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 NA f <dbl [1]> #> 3 3 g <dbl [1]> #> 4 NA h <dbl [1]>
with_df2(df2[["tb"]] <- df[1, ]) #> Error in `[[<-.data.frame`(`*tmp*`, "tb", value = structure(list(n = 1L, : replacement has 1 row, data has 4	with_tbl2(tbl2[["tb"]] <- tbl[1, ]) #> # A tibble: 4 × 2 #> tb$n $c $li m[,1] [,2] #> <int> <chr> <list> <dbl> <dbl> #> 1 1 e <dbl [1]> 1 0 #> 2 1 e <dbl [1]> 0 1 #> 3 1 e <dbl [1]> 0 0 #> 4 1 e <dbl [1]> 0 0 #> # ℹ 1 more variable: m[3:4] <dbl>
with_df2(df2[["m"]] <- df2[["m"]][1, , drop = FALSE]) #> Error in `[[<-.data.frame`(`*tmp*`, "m", value = structure(c(1, 0, 0, : replacement has 1 row, data has 4	with_tbl2(tbl2[["m"]] <- tbl2[["m"]][1, , drop = FALSE]) #> # A tibble: 4 × 2 #> tb$n $c $li m[,1] [,2] #> <int> <chr> <list> <dbl> <dbl> #> 1 1 e <dbl [1]> 1 0 #> 2 NA f <int [2]> 1 0 #> 3 3 g <int [3]> 1 0 #> 4 NA h <chr [1]> 1 0 #> # ℹ 1 more variable: m[3:4] <dbl>

j must be a scalar numeric or a string, and cannot be NA. If j is OOB, a new column is added on the right hand side, with name repair if needed.

	with_tbl(tbl[["x"]] <- 0) #> # A tibble: 4 × 4 #> n c li x #> <int> <chr> <list> <dbl> #> 1 1 e <dbl [1]> 0 #> 2 NA f <int [2]> 0 #> 3 3 g <int [3]> 0 #> 4 NA h <chr [1]> 0
with_df(df[[4]] <- 0) #> n c li V4 #> 1 1 e 9 0 #> 2 NA f 10, 11 0 #> 3 3 g 12, 13, 14 0 #> 4 NA h text 0	with_tbl(tbl[[4]] <- 0) #> # A tibble: 4 × 4 #> n c li ...4 #> <int> <chr> <list> <dbl> #> 1 1 e <dbl [1]> 0 #> 2 NA f <int [2]> 0 #> 3 3 g <int [3]> 0 #> 4 NA h <chr [1]> 0
with_df(df[[5]] <- 0) #> Warning in format.data.frame(if #> (omit) x[seq_len(n0), , drop = #> FALSE] else x, : corrupt data #> frame: columns will be truncated or #> padded with NAs #> n c li V5 #> 1 1 e 9 NULL 0 #> 2 NA f 10, 11 <NA> 0 #> 3 3 g 12, 13, 14 <NA> 0 #> 4 NA h text <NA> 0	with_tbl(tbl[[5]] <- 0) #> Error in `[[<-`: #> ! Can't assign to columns beyond the end with non-consecutive locations. #> ℹ Input has size 3. #> ✖ Subscript `5` contains non-consecutive location 5.

df[[j]] <- a replaces the complete column so can change the type.

[[<- supports removing a column by assigning NULL to it.

Removing a nonexistent column is a no-op.

Definition of x$name <- a

x$name <- a and x$"name" <- a are equivalent to x[["name"]] <- a.⁶

	with_tbl(tbl$n <- 0) #> # A tibble: 4 × 3 #> n c li #> <dbl> <chr> <list> #> 1 0 e <dbl [1]> #> 2 0 f <int [2]> #> 3 0 g <int [3]> #> 4 0 h <chr [1]>
	with_tbl(tbl[["n"]] <- 0) #> # A tibble: 4 × 3 #> n c li #> <dbl> <chr> <list> #> 1 0 e <dbl [1]> #> 2 0 f <int [2]> #> 3 0 g <int [3]> #> 4 0 h <chr [1]>

$<- does not perform partial matching.

	with_tbl(tbl$l <- 0) #> # A tibble: 4 × 4 #> n c li l #> <int> <chr> <list> <dbl> #> 1 1 e <dbl [1]> 0 #> 2 NA f <int [2]> 0 #> 3 3 g <int [3]> 0 #> 4 NA h <chr [1]> 0
	with_tbl(tbl[["l"]] <- 0) #> # A tibble: 4 × 4 #> n c li l #> <int> <chr> <list> <dbl> #> 1 1 e <dbl [1]> 0 #> 2 NA f <int [2]> 0 #> 3 3 g <int [3]> 0 #> 4 NA h <chr [1]> 0

Column subassignment: x[j] <- a

• If j is missing, it’s replaced with seq_along(x)
• If j is logical vector, it’s converted to numeric with seq_along(x)[j].

a is a list or data frame

If inherits(a, "list") or inherits(a, "data.frame") is TRUE, then x[j] <- a is equivalent to x[[j[[1]]] <- a[[1]], x[[j[[2]]]] <- a[[2]], …

	with_tbl(tbl[1:2] <- list("x", 4:1)) #> # A tibble: 4 × 3 #> n c li #> <chr> <int> <list> #> 1 x 4 <dbl [1]> #> 2 x 3 <int [2]> #> 3 x 2 <int [3]> #> 4 x 1 <chr [1]>
	with_tbl(tbl[c("li", "x", "c")] <- list("x", 4:1, NULL)) #> # A tibble: 4 × 3 #> n li x #> <int> <chr> <int> #> 1 1 x 4 #> 2 NA x 3 #> 3 3 x 2 #> 4 NA x 1

If length(a) equals 1, then it is recycled to the same length as j.

	with_tbl(tbl[1:2] <- list(1)) #> # A tibble: 4 × 3 #> n c li #> <dbl> <dbl> <list> #> 1 1 1 <dbl [1]> #> 2 1 1 <int [2]> #> 3 1 1 <int [3]> #> 4 1 1 <chr [1]>
with_df(df[1:2] <- list(0, 0, 0)) #> Warning in #> `[<-.data.frame`(`*tmp*`, 1:2, #> value = list(0, 0, 0)): provided 3 #> variables to replace 2 variables #> n c li #> 1 0 0 9 #> 2 0 0 10, 11 #> 3 0 0 12, 13, 14 #> 4 0 0 text	with_tbl(tbl[1:2] <- list(0, 0, 0)) #> Error in `[<-`: #> ! Can't recycle `list(0, 0, 0)` (size 3) to size 2.
with_df(df[1:3] <- list(0, 0)) #> n c li #> 1 0 0 0 #> 2 0 0 0 #> 3 0 0 0 #> 4 0 0 0	with_tbl(tbl[1:3] <- list(0, 0)) #> Error in `[<-`: #> ! Can't recycle `list(0, 0)` (size 2) to size 3.

An attempt to update the same column twice gives an error.

with_df(df[c(1, 1)] <- list(1, 2)) #> Error in `[<-.data.frame`(`*tmp*`, c(1, 1), value = list(1, 2)): duplicate subscripts for columns

with_tbl(tbl[c(1, 1)] <- list(1, 2)) #> Error in `[<-`: #> ! Column index 1 is used #> more than once for assignment.

If a contains NULL values, the corresponding columns are removed after updating (i.e. position indexes refer to columns before any modifications).

with_tbl(tbl[1:2] <- list(NULL, 4:1)) #> # A tibble: 4 × 2 #> c li #> <int> <list> #> 1 4 <dbl [1]> #> 2 3 <int [2]> #> 3 2 <int [3]> #> 4 1 <chr [1]>

NA indexes are not supported.

Just like column updates, [<- supports changing the type of an existing column.

Appending columns at the end (without gaps) is supported. The name of new columns is determined by the LHS, the RHS, or by name repair (in that order of precedence).

	with_tbl(tbl[c("x", "y")] <- tibble("x", x = 4:1)) #> # A tibble: 4 × 5 #> n c li x y #> <int> <chr> <list> <chr> <int> #> 1 1 e <dbl [1]> x 4 #> 2 NA f <int [2]> x 3 #> 3 3 g <int [3]> x 2 #> 4 NA h <chr [1]> x 1
	with_tbl(tbl[3:4] <- list("x", x = 4:1)) #> # A tibble: 4 × 4 #> n c li x #> <int> <chr> <chr> <int> #> 1 1 e x 4 #> 2 NA f x 3 #> 3 3 g x 2 #> 4 NA h x 1
with_df(df[4] <- list(4:1)) #> n c li V4 #> 1 1 e 9 4 #> 2 NA f 10, 11 3 #> 3 3 g 12, 13, 14 2 #> 4 NA h text 1	with_tbl(tbl[4] <- list(4:1)) #> # A tibble: 4 × 4 #> n c li ...4 #> <int> <chr> <list> <int> #> 1 1 e <dbl [1]> 4 #> 2 NA f <int [2]> 3 #> 3 3 g <int [3]> 2 #> 4 NA h <chr [1]> 1
with_df(df[5] <- list(4:1)) #> Error in `[<-.data.frame`(`*tmp*`, 5, value = list(4:1)): new columns would leave holes after existing columns	with_tbl(tbl[5] <- list(4:1)) #> Error in `[<-`: #> ! Can't assign to columns beyond the end with non-consecutive locations. #> ℹ Input has size 3. #> ✖ Subscript `5` contains non-consecutive location 5.

Tibbles support indexing by a logical matrix, but only for a scalar RHS, and if all columns updated are compatible with the value assigned.

with_df(df[is.na(df)] <- 4) #> n c li #> 1 1 e 9 #> 2 4 f 10, 11 #> 3 3 g 12, 13, 14 #> 4 4 h text	with_tbl(tbl[is.na(tbl)] <- 4) #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 4 f <int [2]> #> 3 3 g <int [3]> #> 4 4 h <chr [1]>
with_df(df[is.na(df)] <- 1:2) #> n c li #> 1 1 e 9 #> 2 1 f 10, 11 #> 3 3 g 12, 13, 14 #> 4 2 h text	with_tbl(tbl[is.na(tbl)] <- 1:2) #> Error in `[<-`: #> ! Subscript `is.na(tbl)` is #> a matrix, the data `1:2` must #> have size 1.
with_df(df[matrix(c(rep(TRUE, 5), rep(FALSE, 7)), ncol = 3)] <- 4) #> n c li #> 1 4 4 9 #> 2 4 f 10, 11 #> 3 4 g 12, 13, 14 #> 4 4 h text	with_tbl(tbl[matrix(c(rep(TRUE, 5), rep(FALSE, 7)), ncol = 3)] <- 4) #> Error in `[<-`: #> ! Assigned data `4` must be #> compatible with existing data. #> ℹ Error occurred for column `c`. #> Caused by error in `vec_assign()` at tibble/R/subassign-backend.R:193:3: #> ! Can't convert <double> to <character>.

a is a matrix or array

If is.matrix(a), then a is coerced to a data frame with as.data.frame() before assigning. If rows are assigned, the matrix type must be compatible with all columns. If is.array(a) and any(dim(a)[-1:-2] != 1), an error is thrown.

	with_tbl(tbl[1:2] <- matrix(8:1, ncol = 2)) #> # A tibble: 4 × 3 #> n c li #> <int> <int> <list> #> 1 8 4 <dbl [1]> #> 2 7 3 <int [2]> #> 3 6 2 <int [3]> #> 4 5 1 <chr [1]>
with_df(df[1:3, 1:2] <- matrix(6:1, ncol = 2)) #> n c li #> 1 6 3 9 #> 2 5 2 10, 11 #> 3 4 1 12, 13, 14 #> 4 NA h text	with_tbl(tbl[1:3, 1:2] <- matrix(6:1, ncol = 2)) #> Error in `[<-`: #> ! Assigned data `matrix(6:1, #> ncol = 2)` must be compatible #> with existing data. #> ℹ Error occurred for column `c`. #> Caused by error in `vec_assign()` at tibble/R/subassign-backend.R:193:3: #> ! Can't convert <integer> to <character>.
	with_tbl(tbl[1:2] <- array(4:1, dim = c(4, 1, 1))) #> # A tibble: 4 × 3 #> n c li #> <int> <int> <list> #> 1 4 4 <dbl [1]> #> 2 3 3 <int [2]> #> 3 2 2 <int [3]> #> 4 1 1 <chr [1]>
	with_tbl(tbl[1:2] <- array(8:1, dim = c(4, 2, 1))) #> # A tibble: 4 × 3 #> n c li #> <int> <int> <list> #> 1 8 4 <dbl [1]> #> 2 7 3 <int [2]> #> 3 6 2 <int [3]> #> 4 5 1 <chr [1]>
with_df(df[1:2] <- array(8:1, dim = c(2, 1, 4))) #> n c li #> 1 8 4 9 #> 2 7 3 10, 11 #> 3 6 2 12, 13, 14 #> 4 5 1 text	with_tbl(tbl[1:2] <- array(8:1, dim = c(2, 1, 4))) #> Error in `[<-`: #> ! `array(8:1, dim = c(2, 1, #> 4))` must be a vector, a bare #> list, a data frame, a matrix, or #> NULL.
with_df(df[1:2] <- array(8:1, dim = c(4, 1, 2))) #> n c li #> 1 8 4 9 #> 2 7 3 10, 11 #> 3 6 2 12, 13, 14 #> 4 5 1 text	with_tbl(tbl[1:2] <- array(8:1, dim = c(4, 1, 2))) #> Error in `[<-`: #> ! `array(8:1, dim = c(4, 1, #> 2))` must be a vector, a bare #> list, a data frame, a matrix, or #> NULL.

a is another type of vector

If vec_is(a), then x[j] <- a is equivalent to x[j] <- list(a). This is primarily provided for backward compatibility.

	with_tbl(tbl[1] <- 0) #> # A tibble: 4 × 3 #> n c li #> <dbl> <chr> <list> #> 1 0 e <dbl [1]> #> 2 0 f <int [2]> #> 3 0 g <int [3]> #> 4 0 h <chr [1]>
	with_tbl(tbl[1] <- list(0)) #> # A tibble: 4 × 3 #> n c li #> <dbl> <chr> <list> #> 1 0 e <dbl [1]> #> 2 0 f <int [2]> #> 3 0 g <int [3]> #> 4 0 h <chr [1]>

Matrices must be wrapped in list() before assignment to create a matrix column.

	with_tbl(tbl[1] <- list(matrix(1:8, ncol = 2))) #> # A tibble: 4 × 3 #> n[,1] [,2] c li #> <int> <int> <chr> <list> #> 1 1 5 e <dbl [1]> #> 2 2 6 f <int [2]> #> 3 3 7 g <int [3]> #> 4 4 8 h <chr [1]>
	with_tbl(tbl[1:2] <- list(matrix(1:8, ncol = 2))) #> # A tibble: 4 × 3 #> n[,1] [,2] c[,1] [,2] li #> <int> <int> <int> <int> <list> #> 1 1 5 1 5 <dbl [1]> #> 2 2 6 2 6 <int [2]> #> 3 3 7 3 7 <int [3]> #> 4 4 8 4 8 <chr [1]>

a is NULL

Entire columns can be removed. Specifying i is an error.

	with_tbl(tbl[1] <- NULL) #> # A tibble: 4 × 2 #> c li #> <chr> <list> #> 1 e <dbl [1]> #> 2 f <int [2]> #> 3 g <int [3]> #> 4 h <chr [1]>
	with_tbl(tbl[, 2:3] <- NULL) #> # A tibble: 4 × 1 #> n #> <int> #> 1 1 #> 2 NA #> 3 3 #> 4 NA
with_df(df[1, 2:3] <- NULL) #> Error in x[[jj]][iseq] <- vjj: replacement has length zero	with_tbl(tbl[1, 2:3] <- NULL) #> Error in `[<-`: #> ! `NULL` must be a vector, a #> bare list, a data frame or a #> matrix.

a is not a vector

Any other type for a is an error. Note that if is.list(a) is TRUE, but inherits(a, "list") is FALSE, then a is considered to be a scalar. See ?vec_is and ?vec_proxy for details.

with_df(df[1] <- mean) #> Error in rep(value, length.out = n): attempt to replicate an object of type 'closure'

with_tbl(tbl[1] <- mean) #> Error in `[<-`: #> ! `mean` must be a vector, a #> bare list, a data frame, a #> matrix, or NULL.

with_df(df[1] <- lm(mpg ~ wt, data = mtcars)) #> Warning in #> `[<-.data.frame`(`*tmp*`, 1, value #> = structure(list(coefficients = #> c(`(Intercept)` = 37.285126167342, #> : replacement element 2 has 32 rows #> to replace 4 rows #> Warning in #> `[<-.data.frame`(`*tmp*`, 1, value #> = structure(list(coefficients = #> c(`(Intercept)` = 37.285126167342, #> : replacement element 3 has 32 rows #> to replace 4 rows #> Warning in #> `[<-.data.frame`(`*tmp*`, 1, value #> = structure(list(coefficients = #> c(`(Intercept)` = 37.285126167342, #> : replacement element 5 has 32 rows #> to replace 4 rows #> Warning in #> `[<-.data.frame`(`*tmp*`, 1, value #> = structure(list(coefficients = #> c(`(Intercept)` = 37.285126167342, #> : replacement element 7 has 5 rows #> to replace 4 rows #> Error in `[<-.data.frame`(`*tmp*`, 1, value = structure(list(coefficients = c(`(Intercept)` = 37.285126167342, : replacement element 10 has 3 rows, need 4

with_tbl(tbl[1] <- lm(mpg ~ wt, data = mtcars)) #> Error in `[<-`: #> ! `lm(mpg ~ wt, data = #> mtcars)` must be a vector, a bare #> list, a data frame, a matrix, or #> NULL.

Row subassignment: x[i, ] <- list(...)

x[i, ] <- a is the same as vec_slice(x[[j_1]], i) <- a[[1]], vec_slice(x[[j_2]], i) <- a[[2]], … .⁷

	with_tbl(tbl[2:3, ] <- tbl[1, ]) #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 1 e <dbl [1]> #> 3 1 e <dbl [1]> #> 4 NA h <chr [1]>
	with_tbl(tbl[c(FALSE, TRUE, TRUE, FALSE), ] <- tbl[1, ]) #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 1 e <dbl [1]> #> 3 1 e <dbl [1]> #> 4 NA h <chr [1]>

Only values of size one can be recycled.

	with_tbl(tbl[2:3, ] <- tbl[1, ]) #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 1 e <dbl [1]> #> 3 1 e <dbl [1]> #> 4 NA h <chr [1]>
	with_tbl(tbl[2:3, ] <- list(tbl$n[1], tbl$c[1:2], tbl$li[1])) #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 1 e <dbl [1]> #> 3 1 f <dbl [1]> #> 4 NA h <chr [1]>
with_df(df[2:4, ] <- df[1:2, ]) #> Error in `[<-.data.frame`(`*tmp*`, 2:4, , value = structure(list(n = c(1L, : replacement element 1 has 2 rows, need 3	with_tbl(tbl[2:4, ] <- tbl[1:2, ]) #> Error in `[<-`: #> ! Assigned data `tbl[1:2, ]` #> must be compatible with row #> subscript `2:4`. #> ✖ 3 rows must be assigned. #> ✖ Element 1 of assigned data has 2 #> rows. #> ℹ Only vectors of size 1 are #> recycled. #> Caused by error in `vectbl_recycle_rhs_rows()` at tibble/R/subassign-backend.R:169:7: #> ! Can't recycle input of size 2 to size 3.

For compatibility, only a warning is issued for indexing beyond the number of rows. Appending rows right at the end of the existing data is supported, without warning.

	with_tbl(tbl[5, ] <- tbl[1, ]) #> # A tibble: 5 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 NA f <int [2]> #> 3 3 g <int [3]> #> 4 NA h <chr [1]> #> 5 1 e <dbl [1]>
	with_tbl(tbl[5:7, ] <- tbl[1, ]) #> # A tibble: 7 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 NA f <int [2]> #> 3 3 g <int [3]> #> 4 NA h <chr [1]> #> 5 1 e <dbl [1]> #> 6 1 e <dbl [1]> #> 7 1 e <dbl [1]>
with_df(df[6, ] <- df[1, ]) #> n c li #> 1 1 e 9 #> 2 NA f 10, 11 #> 3 3 g 12, 13, 14 #> 4 NA h text #> 5 NA <NA> NULL #> 6 1 e 9	with_tbl(tbl[6, ] <- tbl[1, ]) #> Error in `[<-`: #> ! Can't assign to rows beyond the end with non-consecutive locations. #> ℹ Input has size 4. #> ✖ Subscript `6` contains non-consecutive location 6.
with_df(df[-5, ] <- df[1, ]) #> n c li #> 1 1 e 9 #> 2 1 e 9 #> 3 1 e 9 #> 4 1 e 9	with_tbl(tbl[-5, ] <- tbl[1, ]) #> Error in `[<-`: #> ! Can't negate rows past the end. #> ℹ Location 5 doesn't exist. #> ℹ There are only 4 rows.
with_df(df[-(5:7), ] <- df[1, ]) #> n c li #> 1 1 e 9 #> 2 1 e 9 #> 3 1 e 9 #> 4 1 e 9	with_tbl(tbl[-(5:7), ] <- tbl[1, ]) #> Error in `[<-`: #> ! Can't negate rows past the end. #> ℹ Locations 5, 6, and 7 #> don't exist. #> ℹ There are only 4 rows.
with_df(df[-6, ] <- df[1, ]) #> n c li #> 1 1 e 9 #> 2 1 e 9 #> 3 1 e 9 #> 4 1 e 9	with_tbl(tbl[-6, ] <- tbl[1, ]) #> Error in `[<-`: #> ! Can't negate rows past the end. #> ℹ Location 6 doesn't exist. #> ℹ There are only 4 rows.

For compatibility, i can also be a character vector containing positive numbers.

with_tbl(tbl[as.character(1:3), ] <- tbl[1, ]) #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 1 e <dbl [1]> #> 3 1 e <dbl [1]> #> 4 NA h <chr [1]>

Row and column subassignment

Definition of x[i, j] <- a

x[i, j] <- a is equivalent to x[i, ][j] <- a.⁸

Subassignment to x[i, j] is stricter for tibbles than for data frames. x[i, j] <- a can’t change the data type of existing columns.

with_df(df[2:3, 1] <- df[1:2, 2]) #> n c li #> 1 1 e 9 #> 2 e f 10, 11 #> 3 f g 12, 13, 14 #> 4 <NA> h text	with_tbl(tbl[2:3, 1] <- tbl[1:2, 2]) #> Error in `[<-`: #> ! Assigned data `tbl[1:2, #> 2]` must be compatible with #> existing data. #> ℹ Error occurred for column `n`. #> Caused by error in `vec_assign()` at tibble/R/subassign-backend.R:193:3: #> ! Can't convert <character> to <integer>.
with_df(df[2:3, 2] <- df[1:2, 3]) #> Warning in #> `[<-.data.frame`(`*tmp*`, 2:3, 2, #> value = list(9, 10:11)): provided 2 #> variables to replace 1 variables #> n c li #> 1 1 e 9 #> 2 NA 9 10, 11 #> 3 3 9 12, 13, 14 #> 4 NA h text	with_tbl(tbl[2:3, 2] <- tbl[1:2, 3]) #> Error in `[<-`: #> ! Assigned data `tbl[1:2, #> 3]` must be compatible with #> existing data. #> ℹ Error occurred for column `c`. #> Caused by error in `vec_assign()` at tibble/R/subassign-backend.R:193:3: #> ! Can't convert <list> to <character>.
with_df(df[2:3, 3] <- df2[1:2, 1]) #> Warning in #> `[<-.data.frame`(`*tmp*`, 2:3, 3, #> value = structure(list(n = c(1L, : #> provided 3 variables to replace 1 #> variables #> n c li #> 1 1 e 9 #> 2 NA f 1 #> 3 3 g NA #> 4 NA h text	with_tbl(tbl[2:3, 3] <- tbl2[1:2, 1]) #> Error in `[<-`: #> ! Assigned data `tbl2[1:2, #> 1]` must be compatible with #> existing data. #> ℹ Error occurred for column `li`. #> Caused by error in `vec_assign()` at tibble/R/subassign-backend.R:193:3: #> ! Can't convert <tbl_df> to <list>.
with_df2(df2[2:3, 1] <- df2[1:2, 2]) #> Warning in matrix(value, n, p): #> data length [8] is not a #> sub-multiple or multiple of the #> number of columns [3] #> tb.n tb.c tb.li m.1 m.2 m.3 m.4 #> 1 1 e 9 1 0 0 0 #> 2 1 0 0 0 1 0 0 #> 3 0 1 0 0 0 1 0 #> 4 NA h text 0 0 0 1	with_tbl2(tbl2[2:3, 1] <- tbl2[1:2, 2]) #> Error in `[<-`: #> ! Assigned data `tbl2[1:2, #> 2]` must be compatible with #> existing data. #> ℹ Error occurred for column `tb`. #> Caused by error in `vec_assign()` at tibble/R/subassign-backend.R:193:3: #> ! Can't convert <double[,4]> to <tbl_df>.
	with_tbl2(tbl2[2:3, 2] <- tbl[1:2, 1]) #> # A tibble: 4 × 2 #> tb$n $c $li m[,1] [,2] #> <int> <chr> <list> <dbl> <dbl> #> 1 1 e <dbl [1]> 1 0 #> 2 NA f <int [2]> 1 1 #> 3 3 g <int [3]> NA NA #> 4 NA h <chr [1]> 0 0 #> # ℹ 1 more variable: m[3:4] <dbl>

A notable exception is the population of a column full of NA (which is of type logical), or the use of NA on the right-hand side of the assignment.

	with_tbl({tbl$x <- NA; tbl[2:3, "x"] <- 3:2}) #> # A tibble: 4 × 4 #> n c li x #> <int> <chr> <list> <int> #> 1 1 e <dbl [1]> NA #> 2 NA f <int [2]> 3 #> 3 3 g <int [3]> 2 #> 4 NA h <chr [1]> NA
with_df({df[2:3, 2:3] <- NA}) #> n c li #> 1 1 e 9 #> 2 NA <NA> NA #> 3 3 <NA> NA #> 4 NA h text	with_tbl({tbl[2:3, 2:3] <- NA}) #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 NA NA <NULL> #> 3 3 NA <NULL> #> 4 NA h <chr [1]>

For programming, it is always safer (and faster) to use the correct type of NA to initialize columns.

with_tbl({tbl$x <- NA_integer_; tbl[2:3, "x"] <- 3:2}) #> # A tibble: 4 × 4 #> n c li x #> <int> <chr> <list> <int> #> 1 1 e <dbl [1]> NA #> 2 NA f <int [2]> 3 #> 3 3 g <int [3]> 2 #> 4 NA h <chr [1]> NA

For new columns, x[i, j] <- a fills the unassigned rows with NA.

with_df(df[2:3, "n"] <- 1) #> n c li #> 1 1 e 9 #> 2 1 f 10, 11 #> 3 1 g 12, 13, 14 #> 4 NA h text	with_tbl(tbl[2:3, "n"] <- 1) #> # A tibble: 4 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 1 f <int [2]> #> 3 1 g <int [3]> #> 4 NA h <chr [1]>
	with_tbl(tbl[2:3, "x"] <- 1) #> # A tibble: 4 × 4 #> n c li x #> <int> <chr> <list> <dbl> #> 1 1 e <dbl [1]> NA #> 2 NA f <int [2]> 1 #> 3 3 g <int [3]> 1 #> 4 NA h <chr [1]> NA
with_df(df[2:3, "n"] <- NULL) #> Error in x[[jj]][iseq] <- vjj: replacement has length zero	with_tbl(tbl[2:3, "n"] <- NULL) #> Error in `[<-`: #> ! `NULL` must be a vector, a #> bare list, a data frame or a #> matrix.

Likewise, for new rows, x[i, j] <- a fills the unassigned columns with NA.

with_tbl(tbl[5, "n"] <- list(0L)) #> # A tibble: 5 × 3 #> n c li #> <int> <chr> <list> #> 1 1 e <dbl [1]> #> 2 NA f <int [2]> #> 3 3 g <int [3]> #> 4 NA h <chr [1]> #> 5 0 NA <NULL>

Definition of x[[i, j]] <- a

i must be a numeric vector of length 1. x[[i, j]] <- a is equivalent to x[i, ][[j]] <- a.⁹

NB: vec_size(a) must equal 1. Unlike x[i, ] <-, x[[i, ]] <- is not valid.